PERMANON DIAMOND - 100ML
PERMANON DIAMOND - 100ML
Diamond seals your surfaces and protects them against contamination.
Diamond has been especially developed for the use on transparent/semi-transparent surfaces. Diamond ready-to-use solution can be relied upon for nearly any surface sealing that needs to be done. A clean, grease-free surface suffices. This highly developed and balanced product causes excellent adhesion to the material to be maintained and protected.
The product contains silicium and special water-based maintenance substances.
As a result of the treatment with Diamond the surface becomes even smoother and dirt has no chance of sticking, as it formerly was the case when the surface was rough. The product does not contain alcohol as a carrier substance, nor does it contain flour silanes or chemical silicon oils as solvents. Diamond is non-toxic; silicium adheres electrostatically to surfaces creating a long lasting protection film.
Permanon Diamond demonstrates its outstanding properties in the following areas:
- private household with glass
- facility management
- mirror & glass cleaner
- industry and robotics
- automation systems
- restaurants and hotels
- sweet & salt water vessels
- schools and government agencies
- machine & vehicle maintenance
- fitness equipment
- winter gardens
- green houses
- nursing homes
- Quick and thorough cleaning made easy
Prior to application thoroughly clean and free of grease the surface to be protected, then apply or spray on the surface a 2% solution. Remove excess product, rinse or dry. The high-gloss effect is boosted when the surface is dried with a microfiber cloth. Compared to competitor products Permanon is simple in use as it cleans and protects in one step. This gives you brilliant shine and protection. Moreover, follow-up maintenance/cleaning become easier more than 80%.
Dosage:
First-time application: mix PERMANON (2-3%) with water.
For shine-renewing a 2% solution is sufficient.
Important note:
After mixing with normal tap water the application solution is stable for about three weeks.
1 liter concentrate produces 50 liters of ready-to-use solution at a concentration of 2%.
Concentrate 100% pur
All Permanon products are concentrates and are mixable with regular tap water at 3-5%. This means 3% that is 30 ml must be taken from the concentrate and must be diluted with 1.000 ml water. A mixing rate of 2% equals 500ml which produces about 25 liters ready-to-use solution. Important: the solution freshly prepared with tap water is stable for about three weeks.